EV Electric Charging Stations

With the continuous progress of society and economic growth, people's travel needs are gradually increasing. The consumption of non-renewable energy and the pollution of the environment by fuel vehicles have become a worldwide problem. Based on this, new energy vehicles have gradually entered people's field of vision.

At this stage, electric vehicles account for the highest and most important part of the use of new energy vehicles. Electric vehicles have the advantages of low power cost and low environmental pollution, which can effectively alleviate the gradually decreasing oil resources and environmental pollution.

However, there are still many problems to be solved in the promotion of new energy vehicles, the most important of which is to solve the problem of the small number of ev electric charging stations.

NO	Parameters	EV Electric Charging Stations
General Requirements
1	EV Charger Type	DC
2	Charger Capacity	360KW	480KW
3	Product Model NO.	ENC-DCF360F ANSI-DCF360F JIS-DCF360F	ENC-DCF480H ANSI-DCF480H JIS-DCF480H
4	Mounting	Ground-Mounted(Sequential)
Input Requirements
5	AC Supply System	Three-Phase, 5 Wire AC system
6	Nominal Input Voltage	AC380V±15%
7	Input Frequency	45-65Hz
Environmental Requirements
8	Ambient Temperature Range	-25 to 55°C
9	Ambient Humidity	5 to 95%
10	Storage Temperature	-40 to 70°C
Electrical indicators
11	Current Limit Protection Value	≥110%
12	Steady pressure precision	≤±0.5%
13	Steady flow accuracy	≤±1%
14	Power Factor	≥0.99(50% load above)
Mechanical Requirements
15	IP Ratings	IP 54
16	Cooling	Air-cooled
Output Requirements
17	Connector Terminal	3		4
18	Number of Outputs	6		8
19	Type of Each Output	DC200-750V; DC150-500V(JIS)
20	Single Output Max. Current	200 Amp
User Interface & Display Requirements
21	Display & Touch-Screen Size	7 InchesTouch Screen with Shell
22	User Authentication	Mobile Application or User Interface / QR Code/RFID Card /Password Login
23	Metering Information	Consumption Units
Communication Requirements
24	Communication between EVSE and Central Server	OCPP 1.6J Protocol (Optional)
25	Interface between Charger and CMS	Ethernet/3G/4G/WIFI (Optional)
Protection & Safety Requirements
26	Executive Standard	IEC 62196 2017, IEC 61851 2017, SAE J1772,CHAdeMO etc.
27	Safety Parameters	Over Current, Under Voltage, Residual Current, Surge Protection, Leakage Protection, Short Circuit, Over Temperature, etc.

The charger gun can meet different customers requirements with:

EU Standard (62196-3 IEC2011 CCS-2)

GB/T Standard (GB/T 20234.2-2015)

Us Standard (62196-3 IEC2014 CCS-1)

JPN Standard (CHAdeMO: JEVS G 105)

Tepkos ev electric charging stations design and producing fully considered the safety using, so all our charger have below safety features during design and producing:

There are four different charging method of Tepkos ev electric charging stations:

Payment method of Tepkos ev electric charging stations can be scan QR code or swipe card two options:

Tepkos ev electric charging stations are suitable for many occasions:

Through the intelligent cloud platform, online and offline real-time monitoring of charging pile data can be realized through intelligent management of the entire network, intelligent control, intelligent maintenance, and comprehensive extension of the integration of the Internet of Vehicles system.

Our factory get the certification of ISO9001,ISO14001,ISO45001,products has UL,CE,Rohs,,FCC and so on.

All the ev electric charging stations are packed with carton box and poly wooden case to avoid any damages.

Q: Are you factory or trading company?

A: We are ISO9001-2015 and TUV certificated factory with 15000+ square meter plant.

Q: Have you got any certification for overseas markets?

A: Yes, we already obtained CE and UL certificates. We will applying the certificates for your country if your country need a different certificates.

Q: What is your delivery time normally?

A: It depends on the quantity and model. Normally, the delivery time is 7 days for 100 sets AC charger and 15 days for 100 sets DC charger.

Q: What is your payment terms regarding sample order and batch order?

A: The payment for sample order is 100% upon PO releasing. The payment for batch order is 50% as deposit and balance should be paid before parts delivery.

http://www.jw-newenergy.com/